One-stop Solution for Wire & Cable · Since 1969
Get a Quote
Instrumentation Cables

BS7629-1 — Fire Resistant Instrumention Cable

The Mica+xlPe or sR Insulated & Overall screened Multicore Fire Resistant Instrumentation cables are designed, manufactured and tested as data transmission cables for emergency services. These are used for data and voice transmission when high frequency signal has to be assured also in the event of…

  • Standards: BS 5308/BS · IEC 60331-21 · BS 6387 · BS 8434-1 · BS 5839-1 · NF C32-070-2.3
Get a quote Request datasheet (PDF)

Product Description

RE-2X(St)H…CI. FE 180 PH30 ( CU/MGT+XLPE/OSCR/LSZH 300/500V Class 2 )
RE-2G(St)H…CI. FE 180 PH30 ( CU/SR/OSCR/LSZH 300/500V Class 2 )
RE-2X(St)HSWAH…CI. FE 180 PH30 ( CU/MGT+XLPE/OSCR/LSZH/SWA/LSZH 300/500V Class 2 )
RE-2G(St)HSWAH…CI. FE 180 PH30 ( CU/SR/OSCR/LSZH/SWA/LSZH 300/500V Class 2 )

APPLICATION

The Mica+xlPe or sR Insulated & Overall screened Multicore Fire Resistant Instrumentation cables are designed, manufactured and tested as data transmission cables for emergency services. These are used for data and voice transmission when high frequency signal has to be assured also in the event of a fire.

STANDARDS

Basic design to BS 5308/BS 7629-1

FIRE PERFORMANCE

CIRCUIT INTEGRITY IEC 60331-21; BS 6387 CWZ; DIN VDE 0472-814(FE180); BS 8434-1 (30mins); BS 5839-1 Clause 26 2d; CEI 20-36/2-1; SS229-1; NBN C 30-004 (cat. F3); NF C32-070-2.3(CR1)
CIRCUIT INTEGRITY WITH MECHANICAL SHOCK EN 50200(PH30); CEI 20-36/4-0
CIRCUIT INTEGRITY WITH MECHANICAL SHOCK & WATER SPRAY EN 50200 annex E
SYSTEM CIRCUIT INTEGRITY DIN 4102-12, E30 depending on lay system
FLAME RETARDANCE (SINGLE VERTICAL WIRE TEST) EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2; VDE 0482-332-1 ; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2); CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1*
REDUCED FIRE PROPAGATION (VERTICALLY-MOUNTED BUNDLED WIRES & CABLE TEST) EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4
HALOGEN FREE IEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1; CEI 20-37/2-1 ; BS 6425-1*
NO CORROSIVE GAS EMISSION IEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2; CEI 20-37/2-2 ; BS 6425-2*
MINIMUM SMOKE EMISSION IEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2; CEI 20-37/3-1&2; EN 50268-1&2*; BS 7622-1&2*
NO TOXIC GASES NES 02-713; NF C 20-454

Note: Asterisk * denotes superseded standard.

VOLTAGE RATING

300/500 V

CABLE CONSTRUCTION

Conductor: Plain annealed copper wire, stranded according to IEC(EN) 60228 class 2.
Insulation: Mica glass tape covered by extruded cross-linked XLPE compound or fire resistant silicone rubber compound type EI2 as per BS 7655-1.1.
Cabling: The cores are cabled together in concentric layers with suitable non-hygroscopic fillers.
Overall Screen: Aluminum/polyester tape with 0.5mm2 screen (7/0.3mm) with tinned copper drain wire.
Inner Sheath(optional):Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1
Armouring(optional): Galvanized steel wire armour
Outer Sheath: Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1(Thermosetting LSZH compound type SW2-SW4 as per BS 7655-2.6 can be offered.)

COLOUR CODE

Insulation Colour: White with black numberings.
Sheath Colour: Orange (other colours on request).

TYPE CODE

RE- Instrumentation cable H Halogen free & zero halogen
2X XLPE 2G Silicon Rubber
(St) Static shield of aluminium tape SWA Steel Wire Armoured
FE180 Insulation integrity (950°C 180 minutes) CI Circuit integrity
PH 90 Fire Test for 90 mins at 830°C

Physical AND THERMAL PROPERTIES

Temperature range during operation (fixed state): -30°C – +90°C
Temperature range during installation (mobile state): -20°C – +50°C
Minimum bending radius: 6 x Overall Diameter (unarmoured cables with silicone rubber insulation)
8 x Overall Diameter (unarmoured cables with XLPE insulation)
10 x Overall Diameter (armoured cables)

Electrical PROPERTIES

DIELECTRIC TEST: 2000 V r.m.s. x 5′ (core/core)
INSULATION RESISTANCE XLPE: ≥1000 MΩ x km (at 20°C) SR: ≥300 MΩ x km (at 20°C)
SHORT CIRCUIT TEMPERATURE XLPE: 250°C SR: 350°C

CONSTRUCTION PARAMETERS

CONDUCTOR RE-2X(ST)H.CI. FE 180 PH30 RE-2G(ST)H.CI. FE 180 PH30 RE-2X(ST)HSWAH…CI. FE 180 PH30 RE-2G(ST)HSWAH…CI. FE 180 PH30
NO. OF CORE X CROSS SECTION NO./ NOMINAL DIAMETER OF STRANDS NOMINAL INSULATION THICKNESS UNARMOURED ARMOURED
NOMINAL OVERALL DIAMETER APPROX. WEIGHT DIAMETER UNDER ARMOUR ARMOUR WIRE DIAMETER NOMINAL OVERALL DIAMETER APPROX. WEIGHT
MM2 NO./MM MM MM KG/KM MM MM MM KG/KM
2 core
2×1.0 7/0.43 0.6 8.0 82 8.0 0.90 12.4 288
2×1.5 7/0.53 0.7 8.5 101 8.5 0.90 13.1 342
2×2.5 7/0.67 0.8 10.5 137 10.5 0.90 15.1 419
2×4 7/0.85 0.8 12.5 180 12.5 0.90 17.1 484
3 core
3×1.0 7/0.43 0.6 8.0 100 8.0 0.90 12.4 324
3×1.5 7/0.53 0.7 9.5 127 9.5 0.90 14.1 383
3×2.5 7/0.67 0.8 12.0 176 12.0 0.90 16.6 466
3×4 7/0.85 0.8 13.5 236 13.5 0.90 18.1 560
4 core
4×1.0 7/0.43 0.6 9.0 127 9.0 0.90 13.6 383
4×1.5 7/0.53 0.7 10.5 161 10.5 0.90 15.1 445
4×2.5 7/0.67 0.8 13.0 224 13.0 0.90 17.6 548
4×4 7/0.85 0.8 15.0 302 15.0 1.25 20.5 772
7 core
7×1.0 7/0.43 0.6 11.0 187 11.0 0.9 15.6 485
7×1.5 7/0.53 0.7 12.5 250 12.5 0.90 17.3 597
7×2.5 7/0.67 0.8 15.0 354 15.0 1.25 20.5 862
12 core
12×1.5 7/0.53 0.7 16.0 402 16.0 1.25 21.7 997
12×2.5 7/0.67 0.8 20.0 585 20.0 1.60 26.4 1421
19 core
19×1.5 7/0.53 0.7 19.0 597 19.0 1.60 25.6 1465
19×2.5 7/0.67 0.8 24.0 873 24.0 1.60 30.6 1837

Note : Other conductor sizes & core configurations are available upon request.

Applicable Standards

BS 5308/BSIEC 60331-21BS 6387BS 8434-1BS 5839-1NF C32-070-2.3EN 50200DIN 4102-12

Certificate Display

ISO 9001 Quality Management System
ISO 9001 Certificate (2025–2028)
ISO 9001 Certificate (NOA)
CE — Verification of Conformity
RoHS Compliance Attestation (EU)
Low Voltage Directive Attestation (EU)

Type and routine tests are issued from our own testing centre under the ISO 9001 quality system — test reports and certificates accompany every shipment.

Factory Tour

Why Choose Us

50+ years of experience Trusted manufacturing expertise since 1969
International standards IEC, ASTM, BS, CSA and other global standards
Strict quality control Comprehensive testing throughout production
Large production capacity Reliable supply for utility and EPC projects
Fast global delivery Efficient manufacturing and worldwide shipping
Technical support Expert assistance from inquiry to project completion

Packing & Shipping

  • Wooden, steel or steel-wood drums; drum length to customer requirement
  • Drum marking per customer / utility specification
  • Both drum ends sealed and protected for sea freight
Get in touch

Ready for Your Next Cable Project?

Send us your specifications, cable schedule or RFQ — our engineering team replies with a technical proposal and price within one working day.

  • Emailinfo@qzcablegroup.com
  • WhatsApp / WeChat+86 173 3570 4553
  • Contact personChloe · Export Department
  • Factory addressWest Industrial Park, Zhulin Town, Gongyi City, Henan Province, China

    The more specific the standard and size, the faster we can quote.

    Related products

    Type PLTC and ITC 300V Instrumentation Cable Type PLTC and ITC 300V Instrumentation Cable,Single Pair or Triad,Multiple Pairs or Triads Cable SANS — instrumentation cables For interconnections between instruments, sensors and monitors. Overall screened with specially selected lay schemes in order to counter static and cross talk noises. A “clean” and accurate signal can therefore be expected to be transferred. APL Armouring is provided for increased mechanical… French Standard instrumentation cables These NF M 87-202 EGFA instrumentation cables are used to transmit analogue or digital signals in measurement and process control where chemicals may be present. UL — instrumentation cables Soft annealed bare or tinned copper conductors and PVC flame retardant insulations and jackets are the standard for 300V instrumentation installation. Constructions with heat resistant PVC/PVC that have three or more conductors and 20 AWG or larger conductors may also be used for direct burial…

    Related solutions

    Power Distribution Cable Solutions

    Qingzhou Cable provides low- and medium-voltage cable solutions for electrical distribution networks, supporting power delivery from substations to commercial, industrial and residential users.

    Power Substation Cable Solutions

    Solar & Renewable Energy Cable Solutions

    Building & Infrastructure Cable Solutions

    Mining Cable Solutions

    Industrial Manufacturing Cable Solutions
    Inquiry WhatsApp Email